FLR13Y

Application

These are TPE-E insulated low tension automotive cables used in motor vehicles for lightings, signals and instrument panel circuits operating across wide range of extreme temperature.

Standard

In accordance to ISO 6722-1 class D

Temperature Range (3000 Hrs)

-40°C to +150°C

Cable Construction

Soft annealed electrolytic copper Cu-ETP1 according to DIN EN 13602 ,bare conductor construction acc. To ISO 6722-1

Tinned copper available on request. TPE-E (Thermoplastic Elastomer)

Special Properties

These are polyester based elastomeric cables which offer consistent performance across the entire operating temperature range.Tear and abrasion resistant. High peak temperature resistance.Good resistant to chemical and weather conditions. High impact strength.

Packing

Packing available in 100 mtrs. Longer length available in spools.

Cabel Design Parameters

Nom. Cross-Section (mm²)	No. of Strands	Max. Strand Diameter (mm)	Max. Conductor Diameter (mm)	Max. DC Conductor Resistance at 20°C (Ω/km)	Min. Insulation Thickness (mm)	Overall Diameter
Nom. Cross-Section (mm²)	No. of Strands	Max. Strand Diameter (mm)	Max. Conductor Diameter (mm)	Max. DC Conductor Resistance at 20°C (Ω/km)	Min. Insulation Thickness (mm)	Max	Max
FLR13Y – TYPE A
0.22	7	0.21	0.7	84.8	0.20	1.1	1.2
0.35	7	0.26	0.8	54.4	0.20	1.2	1.3
0.5	19	0.19	1.0	37.5	0.22	1.4	1.6
0.75	19	0.23	1.2	24.7	0.24	1.7	1.9
1	19	0.26	1.35	18.5	0.24	1.9	2.1
1.5	19	0.32	1.7	12.7	0.24	2.2	2.4
2	19	0.37	2.0	9.42	0.28	2.5	2.8
2.5	19	0.41	2.2	7.6	0.28	2.7	3.0
FLR13Y – TYPE B
0.35	12	0.21	0.9	54.4	0.20	1.2	1.4
0.5	16	0.21	1.0	37.5	0.22	1.4	1.6
0.75	24	0.21	1.2	24.7	0.24	1.7	1.9
1	32	0.21	1.35	18.5	0.24	1.9	2.1
1.5	30	0.26	1.7	12.7	0.24	2.2	2.4
2	30	0.31	2.0	9.42	0.28	2.5	2.8
2.5	50	0.26	2.2	7.60	0.28	3.7	3.0
4	56	0.31	2.75	4.71	0.32	3.4	3.7
6	84	0.31	3.3	3.14	0.32	4.0	4.3

Address

Toll Free

Career

Email